Kenwood DDX418BT Instruction Manual - Page 26
Other External Components
View all Kenwood DDX418BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Other External Components AV-IN Connecting an external component See page 45 for more information. Starting playback 1 Select "AV-IN" as the source. 2 Turn on the connected component and start playing the source. Changing the AV-IN name You can change the AV-IN name displayed on the source control screen. • This setting does not affect the source name displayed on the Home screen. 1 Display the screen. On the source control screen, touch as follows: 2 Select an AV-IN name. Using camera Install the front view camera or rear view camera (separately purchased) in the appropriate position according to the instructions supplied with your camera. Connecting the camera See page 45 for more information. • To use the rear view camera, a reverse lead (REVERSE) connection is required. (Page 46) Using the camera • For settings, see or on page 36. To display the rear view camera screen The rear view screen is displayed by shifting the gear to the reverse (R) position when is set to [ON]. (Page 36) • A caution message appears on the screen. To remove the caution message, touch the screen. To display the camera screen manually • When is set to [ON], the picture from the front view camera is displayed. (Page 36) • When is set to [OFF], the picture from the rear view camera is displayed. (Page 36) On the pop-up short-cut menu, touch as follows: Operations while the camera screen is displayed To switch the screen between front view camera and rear view camera Touch the area shown below. To adjust the picture Touch the area shown below. Video menu control is shown. For details, see "Video menu control operations" on page 12. • To exit video menu control, touch the same area again. To display parking guide line Set to [ON] (Page 36) or touch the area shown below. • To close the parking guidelines, touch the same area again. 24 ENGLISH