Kenwood DDX418BT Instruction Manual - Page 44
<Time Alignment>
View all Kenwood DDX418BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Settings 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter. Adjusts the output volume of the selected speaker. Adjusts the crossover frequency for the front or rear speakers (high pass filter). Adjusts the crossover frequency for the speaker (low pass filter). Adjusts the crossover slope. Selects the phase for the speaker. Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your car. Select the listening position (1), select [Distance] or [Gain](2) to make an adjustment , then adjust each speaker setting (3). 1 Select from , , or . 2 Select an item to adjust. [Distance] [Gain] Adjusts the digital time alignment value. Adjusts the output volume of the selected speaker. 3 To determine the adjustment value, see the following "Determining the value for adjustment". To initialize the setting value: Touch [Initialize]. Determining the value for adjustment If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set listening position as the reference point. 2 Measure the distances from the reference point to the speakers. 3 Calculate the differences between the distance of the furthest speaker and other speakers. 4 Set the DTA value calculated in step 3 for individual speakers. 5 Adjust gain for individual speakers. E.g. When is selected as the listening position +3.5 ft 1.4 ft 2.45 ft 4.9 ft +2.45 ft +0 ft 42 ENGLISH