Kenwood DDX418BT Instruction Manual - Page 57
Installing the unit, Installing the unit using the mounting, bracket removed from the car, sleeve,
View all Kenwood DDX418BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installation and Connection Installing the unit Installing the unit using the mounting bracket removed from the car π / [ Installing the trim plate (Only for DDX395/DDX418BT) ] 2 Remove from the upper two catches of the trim plate (]). π / [ Car bracket Note: Select the appropriate screws (supplied) for the mounting bracket. Installing the unit using the mounting sleeve (Only for DDX395) Removing the unit (Only for DDX395) 1 Engage the catch pins on the extraction keys (\) and remove the two locks on the lower part of the trim plate (]). The frame can be removed from the top side in the same manner. 3 Remove the unit by inserting the two extraction keys (\), then pulling them as illustrated. \ Catch ' Lock Be careful to avoid injury from the catch pins on the extraction key. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ENGLISH 55