Kenwood DDX6015BTR Operation Manual - Page 5
Clock settings
View all Kenwood DDX6015BTR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INITIAL SETTINGS 4 Enter a four-digit number (1), then 2 confirm the entry (2). 4 Set the clock time. • Press [Clear] to delete the last entry. • Press [Cancel] to cancel the setting. 5 Repeat step 4 to confirm your security code. • When the unit is being reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then press [Enter]. R Activating the security function You can activate the security function to protect your receiver system against theft. 1 Display the setting screen. On the screen: The security indicator on the monitor panel flashes when the vehicle ignition is off. To deactivate the security function: Select [OFF] for . Clock settings 1 Display the screen. On the source control screen: 2 Display the screen. 3 Display the screen. *1 *2 *3 Synchronizes the clock time with the connected navigation unit. Synchronizes the clock time with FM Radio Data System. Synchronizes the clock time with the digital radio (DAB). Sets the clock manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset] to set the minute to "00". 5 Finish the procedure. • Press [ ] repeatedly to change the page on the menu screen. *1 Only for DDX4015DAB/DDX4015BT/DDX3015. Appears only when the navigation unit is connected. *2 Only for DDX6015BTR/DDX4015BT/DDX4015BTR/DDX3015/ DDX3015R. *3 Only for DDX4015DAB. ENGLISH 5