Kenwood DDX6015BTR Operation Manual - Page 60
DDX4015DAB, 015BTR, DDX4015BT, DDX4015BTR
View all Kenwood DDX6015BTR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
REFERENCES R Tuner AME automatic presetting does not work. • Store stations manually. (Page 21) Static noise while listening to the radio. • Connect the aerial firmly. R Digital Radio (DAB) (only for DDX4015DAB) Cannot receive an ensemble. • Your area is not covered by the ensemble. The DAB aerial is not properly extended or positioned. • Adjust the aerial and try the ensemble scanning again. • Connect an active aerial (not supplied). R AV-IN*1/AV-IN1*2/AV-IN2*2 No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly. • For DDX6015BTR/DDX4015BTR/DDX3015R: set to [AV-IN] • DDX4015DAB/DDX4015BT/DDX3015: When "AV- IN2" is selected as the source, set to [AV-IN2]. *1 Only for DDX6015BTR/DDX4015BTR/DDX3015R. *2 Only for DDX4015DAB/DDX4015BT/DDX3015. R Bluetooth (only for DDX6015BTR/ DDX4015DAB/DDX4015BT/ DDX4015BTR) Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (If the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. • Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). Bluetooth device does not detect the unit. • Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. • For devices compatible with Bluetooth 2.1: Register the device using a PIN code. (Page 31) • For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated in its instructions, try "0000" or "1234". Echo or noise occurs. • Adjust the microphone unit position. • Adjust the echo volume and the noise reduction volume. (Page 33) The unit does not respond when you try to copy the phone book to the unit. • You may have tried to copy the same entries (as stored) to the unit. 60