Kenwood DDX7015 Instruction Manual - Page 19

English TV Control Seek Mode Sets a TV station selection. SEEK If SEEK is not shown, touch Next . The mode is switched each time you touch the button. AUTO 1 Tunes in a station with good reception automatically. AUTO 2 Tune in stations in memory one after another. MANUAL Switches to the next channel manually. Auto Memory Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving channel in memory. 1 Select a channel you wish to store in memory TV 2 Store in memory 1- 6 If 1 to 6 are not shown, touch Next . Continue to touch until the memory number appears. Preset Select Lists and tunes in stations in memory one after the other. 1 Select a band you wish to call TV TV 2 Call the TV Menu 2 Select the Auto Memory mode Menu (P 35 e) AME If AME is not shown, touch Next . 3 Start Auto Memory Touch or . Auto Memory terminates when 6 stations are stored or when all stations are tuned in. The operation ends automatically if you do not operate within 10 seconds. 36 English 3 Call the Preset Select Menu P r e s e t Se l e c t TV 2 TV1 1) 1ch 1 Menu Audio TV1 2) 1ch Set Up SRC TV1 3) 1ch TV1 4) 1ch TV1 5) 1ch TV 3ch TV1 6) 1ch 1 Tunes in the displayed station. If the station name is displayed if it has been set. 2 Returns to the TV Menu. Set Station Name Names a station. 1 Select a station you wish to name TV Direct Search Tunes in a station when its channel number is entered. 1 Selects the Direct Search mode 2 Call the TV Menu Menu 3 Selects the Set Name mode Name Se t 4 Enter a name For character entry details, see (see page 54). 5 Exit the Set Name mode Ok 2 Enter a channel number - When you enter a channel number, signal reception starts. Example: When you receive Channel 06 Direct Search ends automatically if you do not operate within 10 seconds. • You can store up to 20 stations in memory. • You can set a station name only after you have applied the parking brake. English 37