Kenwood DDX9017SM Instruction Manual - Page 54
Other External Components, View Camera
View all Kenwood DDX9017SM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Other External Components Other External Components View Camera NOTE • To connect a camera, see P.83. • To use a rear view camera, a REVERSE lead connection is required. (P.81) • The view of the front view camera or dashboard camera varies depending on the setting of [Dashboard Camera /Front Camera]. • If [R-CAM Interruption] is set to on, the camera screen is displayed when you shift the gear to the reverse (R) position. ÑÑDisplay the camera screen 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Camera]. hhView camera screen appears. 3 Adjust each item as follows. 1 3 4 2 1 Switching the View Camera Touch to change the front view camera[1] or dashboard camera and rear view camera. 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline [1] Touching each time turns on or off the guideline. Available when [Rear Camera] is set to [CMOS 3-Series Camera]. 4 Switching the Angle [1] Touch to change the camera angles: Available when [Dashboard Camera / Front Camera] is set to [CMOS 3-Series Camera]. • [1] Only for ÑÑCamera Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Camera]. hhCamera screen appears. 4 Set each item as follows. ■■Rear Camera ( ) CMOS 3-Series Camera: Select this when the CMOS-3xx series with ID 1 set is connected. Other (Default): Select this when the other camera is connected. ■■R-CAM Interruption ON: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. OFF (Default): Select this when no camera is connected. ■■R-CAM Settings ( ) If you select [CMOS 3-Series Camera] for [Rear Camera], adjusts the CMOS-3xx series with ID 1 set. For details, see the instruction manual of your camera. ■■Parking Guidelines You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is "ON". 54