Kenwood DDX9017SM Instruction Manual - Page 55

■■Guidelines SETUP If you select [ON] for [Parking Guidelines], adjust the parking guidelines. See To adjust the parking guidelines (P.55). ■■Dashboard Camera /Front Camera ( ) Dashboard Camera: Select this when the dashboard camera is connected. CMOS 3-Series Camera: Select this when the CMOS-3xx series with ID 2 set is connected. Other: Select this when the other camera is connected. OFF (Default): Select this when no camera is connected. ■■F-CAM Settings ( ) If you select [CMOS 3-Series Camera] for [Dashboard Camera /Front Camera], adjusts the CMOS-3xx series with ID 2 set. For details, see the instruction manual of your camera. ■■Front Camera Mirror Image ( ) If you select [ON] for [Dashboard Camera / Front Camera]. ON: Displays the picture from the front view camera horizontally reversed. OFF (Default): Displays the picture from the front view camera as it is. ■■Dashboard Camera ( ) ON: Select this when the dashboard camera is connected. OFF (Default): Select this when no camera is connected. To adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. 1 Touch [ON] of [Parking Guidelines] in the Camera screen. (P.54) 2 Touch [Guidelines SETUP] in the Camera screen. Other External Components 3 Adjust the parking guidelines by selecting the mark. 4 Adjusting the position of the selected mark. A C D B Make sure that A and B are horizontally parallel, and that C and D are the same length. NOTE • Touch [Initialize] and after touch [Yes] to set all the marks to the initial default position. External audio/video players- AV-IN 1 Connect an external component to the AV-IN input terminal. (P.83) 2 Select [AV-IN] as the source. (P.13) 3 Turn on the connected component and start playing the source. English 55