Kenwood DDX9702S User Manual - Page 65
Installing the unit - reset button
View all Kenwood DDX9702S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CONNECTION/INSTALLATION R Installation procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the · Installing the unit R Installing the unit R Installing the trim plate 1 Attach the trim plate (2). battery. 2 Make the proper input and output wire 2 connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order: ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. • Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (e.g., the sound may skip). 7 Reconnect the · battery. 8 Press the reset button. 9 Configure . (Page 4) R When installing the unit using the mounting bracket removed from the car 5 or 6 Car Bracket 5 or 6 • Select the appropriate type of screw for the mounting bracket: flat head (5) or round head (6). ENGLISH 65