Kenwood DDX9702S User Manual - Page 69

CONNECTION/INSTALLATION R Connecting the Miracast Dongle to use smartphone/iPod/iPhone over a wireless connection Miracast Dongle: KCA-WL100 (optional accessory) R Connecting external components 1 AV-OUT/Video output (Yellow) 2 Rear view camera input (Yellow) 3 Audio Video input (AV-IN1)*1 4 iPod/Audio Video input (iPod/AV-IN2)*1 5 iDatalink input for connecting ADS adapter (commercially available) 6 HDMI/MHL input 7 Subwoofer preout (monaural output)*2 • Subwoofer left output (White) • Subwoofer right output (Red) 8 Rear preout*2 • Audio left output (White) • Audio right output (Red) 9 Front preout*2 • Audio left output (White) • Audio right output (Red) p Audio output (ø3.5 mini jack) Resistance-free stereo type mini plug q Expansion port for connecting SiriusXM Connect Vehicle Tuner (commercially available) R Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix it on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). *1 When connecting the component to play on "AV-IN1" or "AV- IN2", use the Audio and Video cable CA-C3AV (optional accessory). *2 When connecting an external amplifier, connect its ground wire to 7 the chassis of the car; otherwise the unit may be damaged. ENGLISH 69