Kenwood DMX7705S Instruction manual - Page 33

iPod/iPhone Preparation ÑÑConnectable iPod/iPhone The following models can be connected to this unit. Made for • iPhone 7 Plus • iPhone 7 • iPhone SE • iPhone 6s Plus • iPhone 6s • iPhone 6 Plus • iPhone 6 • iPhone 5s • iPhone 5c • iPhone 5 • iPod touch (6th generation) • iPod touch (5th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with an optional accessory iPod connection cable KCA-iP103, you can supply power to your iPod/ iPhone as well as charge it while playing music. However, the power of this unit must be on. • If you start playback after connecting the iPod, the music that has been played by the iPod is played first. iPod/iPhone ÑÑConnect iPod/iPhone Wired connection Preparation • Connect an iPod/iPhone with the KCA-iP103 (optional accessory) while CarPlay is not connected. • With a CarPlay-capable iPhone, turn off CarPlay by operating the iPhone at functional setup before connecting iPhone. For details of the setup method, contact the manufacturer of the terminal. • DDX8905S/ DDX6905S/ DMX7705S: Plug the iPod/iPhone into the gray USB terminal with the KCA-iP103 (optional accessory). • Only one iPod/iPhone can be connected. 1 Connect the iPod/iPhone using KCA- iP103. (P.95) 2 DDX8905S/ DMX7705S Press the [HOME] button. DDX6905S/ DDX6705S Press the [ ] button. 3 Touch [ ]. 4 Touch [iPod]. (P.12) ●●To disconnect the iPod/iPhone connected with the cable: 1 Detach the iPod/iPhone. Bluetooth connection Pair the iPhone through Bluetooth. Preparation • To connect an iPhone via Bluetooth, register it as the Bluetooth device and do the profile setting of the connection beforehand. See Register the Bluetooth device (P.59) and Connect the Bluetooth device (P.61). • Connect an iPhone on Bluetooth while CarPlay and an iPod/iPhone are not connected on USB. English 33