Kenwood DNX6980 Quick Start Guide - Page 3
Precautions - wiring
UPC - 019048192707
View all Kenwood DNX6980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Precautions 2WARNING To prevent injury or fire, take the following precautions: • Do not watch or fix your eyes on the unit's display when you are driving for any extended period. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Precautions on using this unit • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Select a language used to display menus, audio file tags, etc. See (page 6). • The Radio Data System feature won't work where the service is not supported by any broadcasting station. Protecting the monitor To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with the sharp tip. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with a neutral cleaner, then wipe it again with a clean soft dry cloth. • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print. How to reset your unit If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button • Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, see (page 11). • When the unit is turned on after pressing the Reset button, the Initial SETUP screen is displayed. Refer to (page 6). English | 3