Kenwood DNX7100 Instruction Manual - Page 63

Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. Selecting a Hands-Free Phone You can choose the Hands-Free phone from the list. 1 Display the Hands-Free Set Up screen Hands-Free Set Up screen 1 1 2 2 3 4 5 6 1 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 2 Sets a ringing tone output position. ( "Front R") "Front L": Outputs the tone from the front left-hand side speaker. "Front R": Outputs the tone from the front right-hand side speaker. "Front All": Outputs the tone from the both front speakers. 3 Sets the beep of the incoming call. ( "On") "On": Beep is heard. "Off": Beep is canceled. 4 Displays the Phone Select screen. 5 Displays the Phone Delete screen. 6 Returns to the Hands-Free Control screen. ⁄ • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. • Select the speaker which is further from the microphone in order to prevent howling or echoes. 2 Display the Phone Select list Phone Select screen 1 2 1 Selects the cell-phone to be used as a hands-free phone. 2 Returns to the Hands-Free Set Up screen. 3 Select a Hands-Free phone you wish to use English 63