Kenwood DNX9980HD Instruction Manual - Page 71
Channel Level, Test Tone]
UPC - 019048193421
View all Kenwood DNX9980HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
3 Set a delay time Channel Level You can set the volume at each setup position. 1 Display the Car Type Setup screen Touch [ ] > [ ] > [Audio SETUP] > [Channel Level]. (page 64) 2 Select a speaker you wish to adjust Make fine adjustment of the delay time of the speaker output specified at to have a more suitable environment for your vehicle. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. 1 2 3 4 5 6 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer [Test Tone] Starts or stops test signal tone output for setup check. 3 Adjust the volume +3.4feet 1.6feet 2.5feet 5feet +2.5feet +0feet English 71