Kenwood DPX-5100BT Instruction Manual 2 - Page 29

TROUBLESHOOTING Symptom Sound cannot be heard. "MISWIRING CHECK WIRING THEN PWR ON" appears. General "PROTECTING SEND SERVICE" appears. The unit does not work at all. (For ) "ERROR"/"FAIL" Radio • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. CD/USB/iPod Noise is generated. Tracks do not play back as you intended them to play. "READING" keeps flashing. Elapsed playing time is not correct. "LOADING" appears when you enter search mode by pressing . Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. Send the unit to the nearest service center. Reset the unit. ( 3) Your steering remote controller is not compatible, learning may not be completed. Consult your car audio dealer for details. Connect the antenna firmly. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) Skip to another track or change the disc. Playback order is determined when files are recorded. Do not use too many hierarchical levels or folders. This is caused by how the tracks are recorded. This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later. Symptom Remedy Correct characters are not displayed (e.g. album name). • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected ( 6), some characters may not be displayed correctly. "NA FILE" Make sure the media contains supported audio files. ( 27) "NO DISC" Insert a playable disc into the loading slot. "TOC ERROR" Make sure the disc is clean and inserted properly. "PLEASE EJECT" Reset the unit. If this does not solve the problem, consult your nearest service centre. "NO DEVICE" Connect a USB device, and change the source to USB again. CD/USB/iPod "COPY PRO" A copy-protected file is played. "UNSUPPORTED DEVICE" • Check whether the connected device is compatible with this unit and ensure the file systems are in supported formats. ( 27) • Reattach the device. "UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach the device. "USB HUB IS NOT SUPPORTED" This unit cannot support a USB device connected via a USB hub. • The source does not change to "USB" when you connect a USB device while listening to another source. • "USB ERROR" appears The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device. ENGLISH 29