Kenwood DPX-MP2090S User Manual - Page 21
Touch Sensor Tone, Manual Clock Adjustment, Display Illumination Control, Dimmer, Switching preout
View all Kenwood DPX-MP2090S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • During function control, such as the Menu System, the display stays on. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "DIM ON" "DIM OFF" Setting The display dims. The display doesn't dim. In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. English | 21