Kenwood DPX-MP3110 User Manual - Page 16

Menu Operation Demonstration mode Setting Turning the demonstration mode ON/OFF. 1 Select Demonstration item during Menu mode Select the "DEMO" display. For how to select menu items, refer to (page 14). 2 Set the Demonstration mode Press the Control knob for at least 2 second. Pressing this button for 2 seconds or longer toggles the setting between "On" and "Off". 3 Exit Demonstration mode Press the [M.JOG] button. Basic Operations of remote control VOL AUD FM/AM/+/- 2-ZONE 0 - 9 SRC ATT DIRECT General control Volume control [VOL] Source select [SRC] Volume reduce [ATT] When the button is pressed again, the volume returns to the previous level. When the volume is reduced, the "ATT" indicator flashes. In Audio control Audio item select [AUD] Adjusts the Audio item [VOL] ⁄ • Refer to (page 7) for the operation method, such as the procedures for Audio control and others operations. • The remote control can only select and adjust the Basic Audio item. Selecting and adjusting of the Detail Audio item cannot be done. 16 | DPX-MP5110U/DPX-MP4110/DPX-MP3110