Kenwood DPX-MP3110 User Manual - Page 9

Sound Enhancer Control Adjusts each function of Sound effect individually. 1 Enter the Sound Effect Control mode Press the [SE] button for at least 1 second. "SE CTRL" is displayed. 2 Select the Sound effect item for adjustment Push the Control knob towards right or left. 3 Adjust the Sound effect item Push the Control knob towards up or down. Adjustment Item Bass setting LV setting Display "Bas" "LV" Range Off/Low/High Off/Low/High 4 Exit the Sound Effect Control mode Press the [SE] button. ⁄ • Bass: Assisting the playback for the super bass sound. • LV: Adjusts the sound image by changing the vertical position of the speakers virtually and increases or decreases the soundscape. Spectrum Analyzer Select Selecting the Spectrum Analyzer display. Spectrum Analyzer Scan of Spectrum Analyzer Peak Hold Spectrum Analyzer 1 Spectrum Analyzer 2 Spectrum Analyzer 3 Spectrum Analyzer 4 Spectrum Analyzer 5 Spectrum Analyzer 6 Spectrum Analyzer 7 Spectrum Analyzer 8 Spectrum Analyzer 9 Spectrum Analyzer off Display "S.A Scan" "PeakHold" "Flash" "Meter" "Gravity" "Tension" "Hana-Bi" "Laser" "Dance" "Warp" "Jump" "S.A Off" 1 Enter the Spectrum Analyzer Select mode Press the [COL] button for at least 1 second. "SPEANA" is displayed. 2 Select the Spectrum Analyzer Turn the Control knob. 3 Exit the Spectrum Analyzer Select mode Press the [COL] button. ⁄ • Scan of Spectrum Analyzer: The items from "PeakHold" to "Jump" are displayed in sequence. Illumination Color Select Select the illumination color for display, buttons and control knob. 1 Enter the Illumination color Select mode Press the [COL] button. "Color" is displayed. 2 Select the setting item Push the Control knob towards right or left. Display "All" "Display" "Key" "Rotary" Setting item Sets the same color for all of items. Sets the display color. Sets the button color. Sets the control knob color. 3 Change the color Turn the Control knob. Color setting Scan of Color 1-10 Color 1 Color 2 Display "V.Scan" "Color 1" "Color 2" ... ... Color 10 User color "Color 10" "User" 4 Exit the Illumination color Select mode Press the [COL] button. ⁄ • You can adjust the illumination color to your taste using RGB setting. See (page10) for detail. • When illumination effect (I-EFCT ) setting (page 14) is "2", you can not set color. • When illumination effect (I-EFCT ) setting (page 14) is "3", you can select "ALL" and set "color1" to "10". English | 9