Kenwood DPX-MP4070B User Manual - Page 34
MP3/WMA source, If the following situations, consult your, nearest service center, The messages
View all Kenwood DPX-MP4070B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting Guide MP3/WMA source ? Cannot play an MP3/WMA. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on 'About CDs' (page 8). ? The sound skips when an MP3/WMA is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on 'About CDs' (page 8). The recording condition is bad. Record the media again or use another media. ? The MP3/WMA track time isn't displayed correctly. --- There are times when it isn't displayed correctly according to the MP3/WMA recording conditions. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. Load the disc magazine properly. No CD in the unit. Insert the CD. No Disc: No disc has been loaded in the disc magazine. Load a disc into the disc magazine. Error 04: The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. Clean the CD and load it correctly. Error 05: The CD is upside-down. Load the CD correctly. Blank: Nothing has been recorded on the MD. No Track: No tracks are recorded on the MD, although it has a title. Error 77: The unit is malfunctioning for some reason. Press the reset button on the unit. If the "Error-77" code does not disappear, consult your nearest service center. Error 99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. Check the disc magazine. And then press the reset button on the unit. If the "Error 99" code does not disappear, consult your nearest service center. Hold: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. 34 | English