Kenwood DPX-MP4070B User Manual - Page 36

Specifications Specifications subject to change without notice. FM tuner section Frequency range 50 kHz space : 87.5 MHz - 108.0 MHz 200 kHz space : 87.9 MHz - 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 µV/75 Ω) Frequency response (±3.0 dB) : 30 Hz - 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 30 dB AM tuner section Frequency range 9 kHz space : 531 kHz - 1611 kHz 10 kHz space : 530 kHz - 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBµV (25 µV) Cassette player section Tape speed : 4.76 cm/sec. Wow & Flutter (WRMS) : 0.1 % Frequency response (70 µs) : 40 Hz - 20 kHz (±3 dB) Separation (1 kHz) : 35 dB Signal to Noise ratio Dolby NR Off : 50 dB Dolby B NR On : 60 dB CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle speed : 500 - 200 rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (±1 dB) : 10 Hz - 20 kHz Total harmonic distortion (1 kHz) : 0.01 % Signal to Noise ratio : 100 dB (1 kHz) Dynamic range : 93 dB Channel separation : 85 dB MP3 Decode (KDC-MP4070/KDC-MP4070B) : Compliant with MPEG-1/2 Audio Layer-3 WMA decode (KDC-MP4070/KDC-MP4070B) : Compliant with Windows Media Audio Audio section Maximum output power : 50 W × 4 Full bandwidth power (at less than 1% THD) : 22 W × 4 Preout level / Load : 1800mV/10kΩ Preout impedance : ≤ 600 Ω Auxiliary input Frequency response (±1 dB) : 20 Hz - 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 100 kΩ General Operating voltage (11 - 16V allowable) : 14.4 V Current consumption : 10 A Installation Size (W x H x D) : 178 × 100 × 155 mm Weight : 2.3 kg 36 | English