Kenwood DPX502BT North America - Page 27
Display Settings
View all Kenwood DPX502BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
AUDIO SETTINGS DISPLAY SETTINGS REAR HPF R - HPF FRQ R - HPF SLOPE R - HPF GAIN SUBWOOFER LPF SW LPF FRQ SW LPF SLOPE SW LPF PHASE SW LPF GAIN (Refer FRONT HPF, 22.) 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. -8 to 0: Adjusts the output volume of the subwoofer. • [SUB-W LEVEL]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable only if [SUBWOOFER SET] is set to [ON]. ( 22) • [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 22) • Once you have selected the speaker size ([SPEAKER SIZE], 22), the frequency and slope settings are automatically set for the crossover of the selected speaker. Set the dimmer Press and hold DISP (DIMMER) to turn on or off the dimmer. • If you have set [DIMMER TIME] ( 24), it will be canceled once you press and hold this button. Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [DISPLAY], then press the knob. 3 Turn the volume knob to select an item ( 24), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press and hold to exit. To return to the previous setting item, press . ENGLISH 23