Kenwood DRV-A210 Instruction Manual - Page 16
Installation and Connection
![]() |
View all Kenwood DRV-A210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
14. AV Output The device can be connected to other screen by using the AV cable. (commercially available) 15. DC-IN/Data transfer Port By connecting the device with the supplied cigar lighter adapter cable you are able to charge the device. This will also be utilized to let you connect the USB cord to your computer. You can either connect the cigar lighter adapter cable with the device or magnetic connector. 16. Reset Button On the rare occasions the device has a problem, use the reset button to shut down the device. Simply press the reset until the device turns off and the device will automatically turn on. Installation and Connection Recommended installation position • Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). • Install the device so that it is within the wiping range of the wiper. • Mounting the device to the center of the windshield behind the rear-view mirror will facilitate optimal video recording. Left-hand Drive Right-hand Drive Caution When passing the power cord through the front pillar or another part, observe the points below when performing the wiring work. • Wire the power cord farther forward or farther rearward than the airbag so that it does not interfere with the airbag. • In the case of a vehicle in which the front pillar cover is fixed in place with special clips or the like, the clips may need to be replaced after you remove the front pillar cover. For how to remove the front pillar cover, the availability of replacement parts and other information, contact the vehicle dealer. • Fix the power cord in place with commercially available soft tape or the like so that it does not interfere with driving. 13
![](/manual_guide/products/kenwood-drva210-instruction-manual-21e7d74/16.png)