Kenwood DT-7000S Instruction Manual - Page 9
Naming preset banks, Saving/recalling music information
UPC - 019048150417
View all Kenwood DT-7000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
the presets. Each time you change a preset its number will appear on the display and the stream will play. Option 2: Press the ENTER button. The Preset List Screen will appear on the display, listing all of the stream presets that have been programmed in all 4 banks (right) • Use the CH./PRESET jog dial (front panel) or CH Buttons (remote) to scroll through the list. When the desired Preset List Screen stream is highlighted on the display, press the ENTER button to select it. Naming preset banks You can personalize the four banks of stream presets by assigning a name (up to 6 characters) to each one. For example, you can set up different preset banks for family members ('Dad', 'Billy', etc.), or assign a particular type of music to each one ('Mellow', 'Party', etc.). Bank Name Input Screen Note: Although you can use the corresponding buttons on the unit to name the banks, it is simpler to use the remote. 1. Press the SETUP button to enter the Setup Mode. Bank Select Screen 2. Press the CAT buttons until the Bank Name Input screen appears (top, right). 3. Press the CH button once. The Bank Select screen will appear (second, right). Use the 4 arrow buttons to highlight the bank you want to name. Bank Naming Screen 4. Press the ENTER button. The Bank Naming screen will appear (above). Press the DELETE button multiple times to delete all the letters of the existing name. (Note: There is no DELETE button on the unit.) 5. Press a number button multiple times to select the letters you want (right). When the letter you want is highlighted, press the ENTER button. The letter will appear in the name. • To add spaces, press the SPACE button. (Note: There is no SPACE Selecting letters DT-7000S Instruction Manual button on the unit.) • If you make a mistake, use the CH buttons to move the cursor to the left of the letter you want to delete, and press the DELETE button. 6. Repeat Step 5 to complete the name (top, right). Completed name 7. Press the ENTER button to save your choice (second, right). Press the SETUP button twice to exit the Setup Mode. Saving/recalling music information Saved name Saving music information You can store the name of the currently-playing song and artist (and composer, if the data is available) into memory for recall later. Press the MEMO button to save the data. The Data Saved screen will Data Saved Screen display the following message for a few seconds (above): • You can save data for up to 24 songs. Once all 24 places have been filled, any new artist/song data you save will replace the oldest data. • If the song has already been stored in memory, the display will read "Already Stored". Recalling music information 1. Hold the MEMO button for more than 1 second. The Song Memory List screen will appear (right): 2. Use the CH./PRESET jog dial or CH buttons to scroll through the list. Press the MEMO button to exit. Song Memory List Screen Activating Song Seek You can have the DT-7000S auto-matically prompt you when any of the songs saved on the Song Memory List is playing on any stream. 1. Activate the Song Memory List screen (see previous section). 2. Use the CH./PRESET jog dial or CH buttons to scroll through the list of saved songs until the one you want is highlighted. Song Seek Icon 3. Press and release the ENTER button. An "S" will appear next to the song's name (above). Press the MEMO button to exit. 9