Kenwood EZ500 Instruction Manual - Page 17

HD Radio control features SRC AM FM 4/ ¢ OPEN c.s. AUTO/AME 1 - 6 ST indicator Preset station number ST TI DAB NEWS MP3 WMA ATT DIGITAL ANALOG RDS PTY M P S Band display Frequency display NOTE With the HD Radio tuner, you can use the similar functions to 'Station Preset Memory', 'Auto Memory Entry', 'Tuning Mode', and 'Preset Tuning' of Tuner features. Refer to Tuner features (page 15, 16) for how to use the functions. Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD Radio" display. 2 Select the HF band Press the [FM] button. Each time the [FM] button is pressed it switches between the HF1, HF2, and HF3 bands. Select the HA band Press the [AM] button. 3 Tune up or down band Turn the [4] / [¢] knob. • When you connect an HD Radio, Tuner features of the unit are disabled and switched to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. • During reception of stereo stations the "ST" indicator is ON. • The setting of the CRSC is always ON. Switching to OFF is not possible. • Using 'Receive mode Setting' (page 26) the modes can be switched to digital broadcast automatic switching, analog broadcast only, or digital broadcast only. • When "Digital" has been set with 'Receive mode Setting' (page 26), the seek time will be longer to allow a check of whether the transmission is a digital broadcast. English | 17