Kenwood G-EQ300 User Manual - Page 16

Creation of desired equalizer patterns G-EQ300 (En/K) 16 5 Select the center frequency. FREQUENCY JOG 98HZ 6 Adjust the level. EQ.LEVEL 7 Select the inclination of the curve. WIDE/NARROW 63 98 160 250 400 625 1k ¶Pressing the FLAT key allows to start adjustment from the flat level position. Each press switches the display as follows. 1 WIDE : Curve with a gentle slope. 2 NARROW: Curve with a sharp slope. WIDE NARROW One the two shall light up. 8 When adjustment of center frequencies F2 and/ or F3 is required: 63 98 160 250 400 625 1k 63 98 160 250 400 625 1k WIDE NARROW ¶One adjusted, the curve remains the same until next time it is pressed. Repeat steps 4 to 7 above for each center frequency. 40 63 98 160 250 400 625 1k 1.5k 2.5k 3.9k 6.3k 10k 16 k When two curves F1 and F2 or three curves F1, F2 and F3 are set, the curve combining them will be displayed in a few seconds. 40 63 98 160 250 400 625 1k 1.5k 2.5k 3.9k 6.3k 10k 16 k ¶For finer adjustment, perform the graphic mode operation described in the following page. &