Kenwood G-EQ300 User Manual - Page 9

System connections About the system control connections G-EQ300 (En/K) 9 When this unit is connected to KENWOOD audio component system "SERIES 21", also connect them through the system control cords to allow system-control operations between components. Connection example AV CONTROL CENTER POWER AMPLIFIER GRAPHIC EQUALIZER CASSETTE DECK 1 CASSETTE DECK 2 CD PLAYER SYSTEM CONTROL System control cord SYSTEM CONTROL SYSTEM CONTROL System control cord *4 SYSTEM CONTROL System SYSTEM CONTROL control cord The SERIES 21 components which can be system-connected with this unit include the LD player, MD recorder and DVD player. Notes 1. Do not connect the SERIES 21 components to other system components using system control cords. 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals. *4.When a cassette deck is connected to the graphic equalizer,do not connect the system control cord to the cassette deck. About the system control operations (Available operations when SERIES 21 components are connected through system control cords) Remote Control Lets you operate source components with the system remote supplied with AV CONTROL CENTER. Automatic Operation When you start playback from a source component, the input selector on AV CONTROL CENTER switches to that component automatically. (Except TAPE 2) Synchronized Recording Lets you synchronize recording with the start of playback when recording from CD or LD .