Kenwood K-8302 Operation Manual - Page 13

Advanced Operations

Get Kenwood K-8302 PDF manuals and user guides View all Kenwood K-8302 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

SELCALL (SELECTIVE CALLING) A Selcall is a voice call to a particular station or to a group of stations. ■ Transmitting 1 Select your desired zone and channel. 2 Press the microphone PTT switch and begin your conversation. ■ Receiving If enabled by your dealer, an alert tone will sound and the LED will blink when a Selcall has been received. To respond to the call, press the PTT switch and speak into the microphone. ■ Identification Codes An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver must have its own Fleet and ID number. Note: The ID range may be limited by programming. PAGING CALL 1 Select your desired zone and channel. 2 Press and hold the key programmed as Paging Call for 1 second to transmit your PTT List ID, to request a call. STATUS MESSAGE You can transmit pre-programmed status messages by pressing the keys programmed as Status 1 and Status 2. Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved for special messages). • "dt" appears on the display when sending a status message. "Ed" appears on the display when receiving an acknowledgement. "Er" appears on the display during status message no reply. GPS REPORT If a GPS unit (NMEA-0183 format) is installed on your transceiver, you can press the key programmed as Send the GPS data to send your location data. ADVANCED OPERATIONS EMERGENCY CALLS If your transceiver has been programmed with the Emergency function, you can make emergency calls. There are 2 levels of emergency calls: 1st Emergency mode and 2nd Emergency mode. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
9
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a group of stations.
■
Transmitting
1
Select your desired zone and channel.
2
Press the microphone
PTT
switch and begin your conversation.
■
Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when
a Selcall has been received.
To respond to the call, press the
PTT
switch and speak into the microphone.
■
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
Note:
The ID range may be limited by programming.
P
AGING
C
ALL
1
Select your desired zone and channel.
2
Press and hold the key programmed as
Paging Call
for 1 second to transmit
your PTT List ID, to request a call.
S
TATUS
M
ESSAGE
You can transmit pre-programmed status messages by pressing the keys
programmed as
Status 1
and
Status 2
.
Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved
for special messages).
•
“dt” appears on the display when sending a status message.
“Ed” appears on the
display when receiving an acknowledgement.
“Er” appears on the display during status
message no reply.
GPS R
EPORT
If a GPS unit (NMEA-0183 format) is installed on your transceiver, you can press
the key programmed as
Send the GPS data
to send your location data.
ADVANCED OPERATIONS
E
MERGENCY
C
ALLS
If your transceiver has been programmed with the Emergency function, you can
make emergency calls.
There are 2 levels of emergency calls:
1st Emergency
mode and 2nd Emergency mode.