Kenwood KAC9102D Instruction Manual - Page 4
Connection
View all Kenwood KAC9102D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connection 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery's positive terminal. ■ RCA cable or Speaker level input connection • RCA cable Connections 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. NOTE • Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage. CENTER UNIT (CD receiver, etc.) RCA cable ground terminal '.$ • Speaker level input Connections Cable Color of the connector 9 White Left · White/Black 9 Gray Right · Gray/Black Genuine-accessory car stereo (No line output center unit etc.) * Commercially available parts Power control wire RCA cable* Left input Right input Car fuse box ACC Battery ■ Power wire and Speaker wire connection Power control wire Terminal cover Battery wire* Protective Fuse* Lead terminal* Subwoofer (L + R) Battery Ground wire* ■ Remote cable connection (KAC-9152D/8152D only) 2CAUTION • Before connecting the remote controller cables, always set the Bass boost level control to "0dB". Remote cable 4 English Remote controller