Kenwood KDC 138 Instruction Manual - Page 4

Basic Operation - faceplate

Page 4 highlights

Basic Operation Release Display Disc slot Control knob [ ] Auxiliary input [VOL] [SRC] [1] [2] [3] [4] [5] [6] [AUTO] [B.BOOST] General functions Power/Source Select button [SRC] Turns on the power. When the power is on, the source switches between Tuner ("TUNER"/ "TUnE") , CD ("CD") , Auxiliary input ("AUX"/ "AUH"), and Standby ("STANDBY"/ "STBy") each time this button is pressed. Press at least 1 second to turn off the power. ⁄ • When an optional accessory is connected, the source name for each device appears (KDC-MP238 only). Volume control [VOL] Bass boost [B.BOOST] Switches between Boost 1 ("BB-L L1"/ "L1 BB-L"), Boost 2 ("BB-L L2"/ "L2 BB-L"), and Boost off ("BB-L OFF"/ "OFF BB-L") each time this button is pressed. Faceplate release Release Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. (KDC-MP238/KDC-238CR/KDC-138CR) • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Auxiliary input Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ø). ⁄ • Use the mini-plug cable which is stereo type and does not have any resistance. Muting volume upon reception of phone call When there is a call, "CALL" is displayed and the audio system is paused. When the call ends, "CALL" disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call. Subwoofer output (KDC-MP238/KDC-MP238CR/ KDC-MP208/KDC-138) Control knob Switches between ON ("SW ON"/ "On SUB") and OFF ("SW OFF"/ "OFF SUB") each time the bottom side is pressed for at least 2 seconds. Clock display (KDC-138/KDC-138CR) Control knob Switches between ON and OFF each time the center is pressed at least one second. 4 | KDC-MP238/CR/KDC-MP208/KDC-138/CR

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

4
|
KDC-MP238/CR/KDC-MP208/KDC-138/CR
General functions
Power/Source Select button
[SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”/ “TUnE”) , CD (“CD”) , Auxiliary input
(“AUX”/ “AUH”), and Standby (“STANDBY”/ “STBy”) each
time this button is pressed.
Press at least 1 second to turn off
the power.
• When an optional accessory is connected, the source name
for each device appears (KDC-MP238 only).
Volume control
[VOL]
Bass boost
[B.BOOST]
Switches between Boost 1 (“BB-L L1”/ “L1 BB-L”), Boost
2 (“BB-L L2”/ “L2 BB-L”), and Boost off
(“BB-L OFF”/ “OFF
BB-L”) each time this button is pressed.
Faceplate release
Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
(KDC-MP238/KDC-238CR/KDC-138CR)
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Auxiliary input
Auxiliary input
Connect a portable audio device with mini-plug cable
(3.5 ø).
• Use the mini-plug cable which is stereo type and does not
have any resistance.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output (KDC-MP238/KDC-MP238CR/
KDC-MP208/KDC-138)
Control knob
Switches between ON (“SW ON”/ “On SUB”) and OFF
(“SW OFF”/ “OFF SUB”) each time the bottom side is
pressed for at least 2 seconds.
Clock display (KDC-138/KDC-138CR)
Control knob
Switches between ON and OFF each time the center
is pressed at least one second.
[VOL]
Release
Display
[SRC]
[1]
[2]
[3]
[4]
[5]
[6]
[AUTO]
[B.BOOST]
Disc slot
Auxiliary input
[
]
Control
knob
Basic Operation