Kenwood KDC-155U Instruction Manual - Page 10

AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO CTRL], then press the knob. 3 Turn the volume knob to make a selection (see the table below), then press the knob. Repeat step 3 until the desired item is selected or activated. 4 Press and hold to exit. • To return to the previous hierarchy, press . Default: XX SUB-W LEVEL -15 to +15 (0): Adjusts the subwoofer output level. BASS LEVEL MID LEVEL TRE LEVEL -8 to +8 (0): -8 to +8 (0): -8 to +8 (0): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) EQ PRO (for KDC-X397 ) BASS ADJUST BASS CTR FRQ 60/ 80/ 100/ 200: Selects the center frequency. BASS LEVEL -8 to +8 (0): Adjusts the level. BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor. BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels. MID ADJUST MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency. MID LEVEL -8 to +8 (0): Adjusts the level. MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor. TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency. TRE LEVEL -8 to +8 (0): Adjusts the level. PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.) BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ; OFF: Cancels. 10 LOUDNESS LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. SUBWOOFER ON: Turns on the subwoofer output. ; OFF: Cancels. SET/ SUB-W SET DETAILED SET/ DETAIL SET HPF For KDC-X397 / KDC-355U : THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/ 150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz are sent to the speakers. LPF SUBWOOFER/ THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ LPF SUB-W 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. SUB-W PHASE REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]/ [LPF SUB-W].) SUPREME SET ON: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playing back an MP3/WMA disc or a USB device, except iPhone/iPod.) VOLUME OFFSET/ -8 to +8 (for AUX) ; -8 to 0 (for other sources): Presets the volume VOL OFFSET adjustment level of each source. (Before adjustment, select the source you (Default: 0) want to adjust.) For KDC-255U / KDC-155U / KDC-MP255U / KDC-MP155U / KMR-355U : • [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (« 4) • [SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON]. EN_KDC-X397[KWK0]f.indd 10 7/24/12 5:04:37 PM