Kenwood KDC 205 Instruction Manual - Page 8

English General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STBY" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the setting switches as shown below. Speaker type Display OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in. speaker "SP-F" "SP-O" "SP-6" "SP-5" 4 Exit Speaker Setting mode Press the [Q] button. Clock Display Press the [CLK] button. Each time the button is pressed the clock display turns ON or OFF. Adjusting Clock 1 Select the clock display Press the [CLK] button. 2 Enter clock adjustment mode Press the [ADJ] button for at least 2 seconds. The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. 4 Exit clock adjustment mode Press the [CLK] button. Function of the KDC-205/KDC-205CR DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Set the DSI While pressing the [1] and [3] button, press the [SRC] button. Each time the step 1 and 2 operation is done the DSI turns ON or OFF. -8-