Kenwood KDC-BT265U North America - Page 25

AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J / K to select an item, then press . To return to the previous setting item, press . Default: XX SUB-W LEVEL -50 to +10 (0): Adjusts the subwoofer output level. MANUAL EQ BAND1 LEVEL LEVEL -9 to +9 (0): (Refer to BAND2 LEVEL below.) BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels. BAND2 LEVEL to BAND13 LEVEL -9 to +9 (0): The sound elements (frequency level, tone level, Q factor) are preset into each selection (BAND1 LEVEL to BAND13 LEVEL). Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) Q FACTOR 1.35/ 1.50/ 2.00: Adjust the quality factor. PRESET EQ NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL/ USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [MANUAL EQ].) BASS BOOST LEVEL1/ LEVEL2/ LEVEL3/ LEVEL4/ LEVEL5 or LV1/ LV2/ LV3/ LV4/ LV5: Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LEVEL1/ LEVEL2 or LV1/ LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. VOLUME OFFSET -15 to +6 (0): Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.) SOUND EFFECT SOUND RECNSTR (Sound reconstruction) (Not applicable for TUNER source, AUX source and SIRIUS XM source.) ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. SPACE ENHANCE (Not applicable for TUNER source.) SMALL/ MEDIUM/ LARGE or SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels. SND REALIZER LEVEL1/ LEVEL2/ LEVEL3 or LV1/ LV2/ LV3: Virtually makes the sound more realistic. ; OFF: Cancels. STAGE EQ LOW/ MIDDLE/ HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels. SPEAKER SIZE The frequency and slope settings are automatically set for the crossover of the selected speaker. ( 22) FRONT SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. TWEETER SMALL/ MIDDLE/ LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. REAR 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. SUBWOOFER 6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. ENGLISH 21