Kenwood KDC-BT265U North America - Page 26

Display Settings

Get Kenwood KDC-BT265U PDF manuals and user guides View all Kenwood KDC-BT265U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

AUDIO SETTINGS DISPLAY SETTINGS X ' OVER TWEETER FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT -8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT -8 to 0: Adjusts the output volume of the right tweeter. FRONT HPF F - HPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter). ; THROUGH: All signals are sent to the selected speakers. F - HPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) F - HPF GAIN -8 to 0: Adjusts the output volume of the selected speaker. REAR HPF R - HPF FRQ (Refer FRONT HPF settings above.) R - HPF SLOPE R - HPF GAIN SUBWOOFER SW LPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ LPF 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. SW LPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) SW LPF PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. SW LPF GAIN -8 to 0: Adjusts the output volume of the subwoofer. • (For / ) [SUB-W LEVEL]/ [SUBWOOFER SET]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. ( 4) • [SUB-W LEVEL]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable only if [SUBWOOFER SET] is set to [ON]. • [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. (For / / ) Set the dimmer Press and hold DISP (DIMMER) to turn on or off the dimmer. • If you have set [DIMMER TIME] ( 23), it will be canceled once you press and hold this button. Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [DISPLAY], then press the knob. 3 Turn the volume knob to select an item ( 23), then press the knob. 4 Repeat step 3 until the desired item is selected/ activated or follow the instructions stated on the selected item. 5 Press and hold to exit. To return to the previous setting item, press . 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
22
AUDIO SETTINGS
X ' OVER
TWEETER
FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
10KHZ
/
12.5KHZ
:
Adjusts the crossover frequency for the tweeter speaker.
GAIN LEFT
–8
to
0
: Adjusts the output volume of the left tweeter.
GAIN RIGHT
–8
to
0
: Adjusts the output volume of the right tweeter.
FRONT HPF
F - HPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
: Adjusts the crossover frequency for the selected
speakers (high pass filter).
 ;
THROUGH
: All signals are sent to the selected
speakers.
F - HPF SLOPE
–6DB
/
–12DB
/
–18DB
/
–24DB
: Adjusts the crossover slope.
(Selectable only if a setting other than [
THROUGH
] is selected for [
F - HPF FRQ
].)
F - HPF GAIN
–8
to
0
: Adjusts the output volume of the selected speaker.
REAR HPF
R - HPF FRQ
(Refer
FRONT HPF
settings above.)
R - HPF SLOPE
R - HPF GAIN
SUBWOOFER
LPF
SW LPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
: Adjusts the crossover frequency for the subwoofer (low
pass filter). ;
THROUGH
: All signals are sent to the subwoofer.
SW LPF SLOPE
–6DB
/
–12DB
/
–18DB
/
–24DB
: Adjusts the crossover slope.
(Selectable only if a setting other than [
THROUGH
] is selected for [
SW LPF FRQ
].)
SW LPF PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer output to be
in line with the speaker output for optimum performance.
SW LPF GAIN
–8
to
0
: Adjusts the output volume of the subwoofer.
• (For
/
)
[
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
SUBWOOFER
] of [
SPEAKER SIZE
]/ [
SUBWOOFER LPF
] of [
X ‘ OVER
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUB-W
].
(
 
4
)
•
[
SUB-W LEVEL
]/ [
SUBWOOFER
] of [
SPEAKER SIZE
]/ [
SUBWOOFER LPF
] of [
X ‘ OVER
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
• [TWEETER]
,
[REAR HPF]
and
[SUBWOOFER LPF]
of
[X ‘ OVER]
is selectable only if a setting other than
[NONE]
is
selected for
[TWEETER]
,
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
.
DISPLAY SETTINGS
Set the dimmer
Press and hold
DISP (DIMMER)
to turn on or off the
dimmer.
• If you have set [
DIMMER TIME
] (
 
23
), it will be canceled
once you press and hold this button.
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
DISPLAY
], then
press the knob.
3
Turn the volume knob to select an item
(
 
23
)
,
then press the knob.
4
Repeat step
3
until the desired item is selected/
activated or follow the instructions stated on the
selected item.
5
Press and hold
to exit.
To return to the previous setting item, press
.
(For
/
/
)