Kenwood KDC-HD545U Instruction Manual - Page 21
Reset Your, Removing, Faceplate, Muting, Volume, Reception, Phone Call - firmware
View all Kenwood KDC-HD545U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
"SP SELECT" i Fine-tuning so that the System Qvalue is optimal when setting the speaker type as follows; SP OFF OFF SP 5/4 For 5&4in. speaker SP 6*9/6: For 6&6x9 in. speaker SP OEM: For the OEM speaker "FIW UP" Display the firmware version and update the firmware. MEDIA USB Select aUSB device. MEDIA CD: Select CD. For how to update the firmware, access our web site. Ihttp://www.kenwood.com/cs/ce/ (Factory setting: Underlined) 4 Make a setting Turn the [VOL] knob and press it when the desired item is displayed. 5 Exit Function Setting mode Press the [ ~ ] button for at least 1 second. Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate. ~ · After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of 'vvater splashing. How to Reset Your Unit If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. 1 Release the faceplate lock so that it can be removed. Refer to (page 21). 2 Press the Reset button and reattaching the faceplate. o ~~~~~I~~II=r==::~==!.J Reset button Function of KDC-HD545U Muting Volume Upon Reception of Phone Call The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL:' display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL:' display disappears and the audio system comes back ON. ~ . To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 36) English I 21