Kenwood KDC-HD545U Instruction Manual - Page 5
General operation
View all Kenwood KDC-HD545U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
General operation Before Using Exit ofthe Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages "CANCEL DEMO" and "PRESS~ "VOLUME KNOB" are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select "YES" and press the [VOL] knob. @2 • The demonstration can be set or cancel using (page 20). Common Operation Power and source select Turns the power ON by pressing the [SRC] button. Pressing [SRC] button each time switches between sources. Tuner ("TUNER" or "HD RADIO") ~ USB or iPod ("USB" or "iPod") ~ CD ("CD") ~ Auxiliary input ("AUX") ~ Standby ("STANDBY") Keeping pressing the [SRC] button at least 1 second turns the power OFF. Q ~ • When connection of the iPod is recognized, the source display changes from "USB" to "iPod': • The source "CD" and 'Wod" can be selected when each source is ready to play. • When an optional accessory is connected, the source name for each device appears. Volume Turning the [VOL] knob adjusts the sound volume. Function Setting Operation The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures. 1 Select the source Press the [SRC] button. Function items vary from source to source. For a list of the function items. Refer to (Page 34). 2 Enter Function Setting mode KDC-BT645U: Press the [VOL] knob for at least 1 second. KDC-HD545U: Press the [VOL] knob. "FUNCTION" is displayed. 3 Select your desired function item Turn the [VOL] knob and press it when the desired item is displayed. . Repeat the operation until your desired function item is selected. @2 Press the [~] button to return to the previous item. Example: 7U ~~~® [VOL] [VOL] @~ In this manual, the above selection is indicated as Select "AUDIO CONTROl" >"DETAILED SET" > "LPF SUBWOOFER~ 4 Make a setting Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. S Exit Function Setting mode Press the [ ~ ] button for at least 1 second. English I 5