Kenwood KDC-MP205 Instruction Manual - Page 19
Deactivating Security Code, Touch Sensor Tone - reset
View all Kenwood KDC-MP205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. ⁄ • If you enter the wrong Code in steps 4 through 6, repeat from step 4. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the Security Code. "APPROVED" is displayed. Now, you can use the unit. ⁄ • When the Security Code function is activated, "CODE SET" changes to "CODE CLR". • To deactivate the Security Code function, see the next section . Function of KDC-MP2035/KDC-MP235 In Standby mode Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Push the Control knob towards [FM] or [AM]. Select the "CODE CLR" display. 2 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Select the digits to enter Push the Control knob towards [4] or [¢]. 4 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. English | 19