Kenwood KDC-MP205 Instruction Manual - Page 22
Text Scroll, Built-in Auxiliary input Setting, CD Read Setting, Demonstration mode Setting - demo mode
View all Kenwood KDC-MP205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Menu system Text Scroll Setting the displayed text scroll. Display "SCL AUTO" "SCL MANU" Setting Repeats scroll. Scrolls when the display changes. ⁄ • The text scrolled is listed below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title - Text for the SIRIUS tuner source, HD Radio source, including Channel name, etc. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display "DEMO ON" "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode). In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display "AUX OFF" "AUX ON1" "AUX ON2" Setting When selecting the source there's no Auxiliary Input. When selecting the source there's Auxiliary Input. When the unit is turned on by AUX source, the attenuator function is activated. Press [ATT] button to cancel the attenuator function in order to listen to the external equipment. there's Auxiliary Input. ⁄ • Setting to "AUX ON2" will not output the noise which is produced when an external equipment is not connected to the AUX terminal. In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD by force. Display "CD READ1" "CD READ2" Setting Play CD and Audio file. Play CD by force. ⁄ • Some music CDs may not play even in the "CD READ2" mode. 22 | English