Kenwood KDC-X500 North America - Page 24

BLUETOOTH® Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears. 2 Search and select this unit model name (KDC-X5**/ KDC-BT5**U/ KMR-D7**BT) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold off the unit. to turn BLUETOOTH - Audio Audio player via Bluetooth 1 Press repeatedly to select BT AUDIO (or press SRC on RC-406). 2 Operate the Bluetooth audio player to start playback. To On the faceplate On the remote control Playback / pause Press . Press . Select group or folder Press J / K. Press / . Reverse / Forward skip Press S / T. Press S / . Reverse / Fast-forward Press and hold S / T. Press and hold S / . Repeat play Press repeatedly. ( Not available ) ALL REPEAT, FILE REPEAT, REPEAT OFF Random play Press and hold to select ALL RANDOM. ( Not available ) • Press to select RANDOM OFF. Select a file from a folder/list Refer to "Select a file from a folder/list" on page 8. ( Not available ) Operations and display indications may differ according to their availability on the connected device. 20