Kenwood KDC-X500 North America - Page 26
R - Hpf Gain
View all Kenwood KDC-X500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
AUDIO SETTINGS VOLUME OFFSET -15 to +6 (0): Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.) SOUND EFFECT SOUND RECNSTR (Not applicable for TUNER source, AUX source and SIRIUS XM source.) (Sound ON: Creates realistic sound by compensating the high- reconstruction) frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. SPACE ENHANCE (Not applicable for TUNER source.) SMALL/ MEDIUM/ LARGE: Virtually enhances the sound space. ; OFF: Cancels. SND REALIZER LEVEL1/ LEVEL2/ LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels. STAGE EQ LOW/ MIDDLE/ HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels. SPEAKER SIZE The frequency and slope settings are automatically set for the crossover of the selected speaker. FRONT SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. TWEETER SMALL/ MIDDLE/ LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. REAR 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. SUBWOOFER 6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. 22 X ' OVER TWEETER FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT -8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT -8 to 0: Adjusts the output volume of the right tweeter. FRONT HPF F - HPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter). ; THROUGH: All signals are sent to the selected speakers. F - HPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) F - HPF GAIN -8 to 0: Adjusts the output volume of the selected speaker. REAR HPF R - HPF FRQ R - HPF SLOPE (Refer FRONT HPF settings above.) R - HPF GAIN SUBWOOFER LPF SW LPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. SW LPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) SW LPF PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. SW LPF GAIN -8 to 0: Adjusts the output volume of the subwoofer. • [SUB-W LEVEL]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable only if [SUBWOOFER SET] is set to [ON]. • [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE].