Kenwood KDC-X796 Instruction Manual - Page 23
SETTINGS], Selectable setting Preset
View all Kenwood KDC-X796 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
displayed. ■■When "(device name)" is displayed, select "[NEW DEVICE]" and press the control knob. ■■When "DEVICE FULL" is displayed, delete a Bluetooth device and retry. 1. Turn the volume knob to select the Bluetooth device, then press and hold to confirm. 2. Turn the volume knob to select "YES", then press to confirm. 2 Turn the volume knob to select a Bluetooth device name, press and hold to confirm. "BT TEST MODE" is displayed. 3 "CONFIRM DVC" is displayed. If "PAIRING OK" is displayed, proceed to step 6. If "PIN CODE" is displayed, proceed to steps 4. If "*** NG" is displayed, press the volume knob. Proceed to steps 3. 4 Input the PIN code ■■Turn the volume knob to select the number. ■■To move to the next digit, press ¢. ■■To delete the last digit, press 4. 5 Press the volume knob to transmit the PIN code. 6 The connection result, "OK" or "NG", is displayed. ■■"PAIRING": Registration to this unit ■■"HF CONNECT": Hands-free phoning ■■"AUD CNT": Audio playback ■■"PB DL": Phone Book downloading 7 Press to exit pairing mode. ■■Data (Phone Book, etc.) of the cell-phone checked for connection does not remain in this unit. Bluetooth Setup 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. ■■See table below for selection. ■■Repeat step 3 until the desired item is selected/activated. ■■Press to return to the previous item. 4 Hold to finish the procedure. ■■To cancel the Bluetooth mode, press . Item Selectable setting (Preset: *) PAIRING DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 22.) PHONE SELECT Selects a cell-phone connection. (For details, see page 22.) AUDIO SELECT Selects a Bluetooth audio player connection. (For details, see page 22.) S-DVC SELECT (For details, see page 22.) DEVICE DELETE Cancel registration of the Bluetooth device. 1. Turn the volume knob to select the Bluetooth device, then press to confirm. 2. Turn the volume knob to select "YES", then press to confirm. DETAILED SET PIN CODE EDIT Specify the PIN code required when registering this unit using the Bluetooth device. By default, "0000" is specified. 1. Turn the volume knob to select the number. ■■To move to the next digit, press ¢. ■■To delete the last digit, press 4. 2. Press the volume knob to register a PIN code AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ; 1 - 8 * -99: Automatically answers the phone call after lapse of 1 - 99 seconds. Continued to next page English 23