Kenwood KDC-X897 Quick Start Guide - Page 15

KDC-X997, KDC-BT955HD, KDC-X897, KDC-BT855U only Installing the Microphone unit 1 Check the installation position of the microphone (Accessory 5). 2 Clean the installation surface. 3 Install the microphone. 4 Lay the cable up to the unit with it secured at several positions using tape or the like. < • Install the microphone as far as possible from the cell phone. Accessory5 Appendix About Audio file • Playable Audio files AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) of USB device • Playable disc media CD-R/RW/ROM • Playable disc file formats ISO 9660 Level 1/2, Joliet, Long file name. • Playable USB devices USB mass storage class • Playable USB device file systems FAT12, FAT16, FAT32 The online manual about audio files is put on the site, www.kenwood.com/cs/ce/audiofile/. Fix the cable with a commercial item of tape. Remove the separator of the microphone, and stick the microphone to the place shown above. Adjust the direction of the microphone to the driver. Models of iPods/iPhones that can be connected to this unit Made for • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone For information on the compatibility with iPod/iPhone software, visit www.kenwood. com/cs/ce/ipod/. English | 15