Kenwood KDC-X996 Instruction Manual - Page 14
Kenwood KDC-X996 Manual
View all Kenwood KDC-X996 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started of Bluetooth SRC VOL 7 The receiver is connected to a Bluetooth device, with "HF CONNECT" or "AUDIO CONNECT" displayed, and exits the easy pairing mode. 5 Turn the [VOL] knob and press it when the desired item is displayed. Select "YES". ⁄ • If an error code is displayed during paring, see (page 87). Registering from Bluetooth devices (Pairing) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Easy pairing function 1 Enter easy pairing mode Press the [ ] button for at least 1 second. Any of the following is displayed depending on Bluetooth device registration condition: - "Searching": When registering a Bluetooth device for the first time. - "(Bluetooth device name)": When a Bluetooth device has already been registered. - "Device Full": When maximum of five Bluetooth devices have already been registered. When a Bluetooth device has already been registered, or maximum of five Bluetooth devices have already been registered/ selecting a Bluetooth device 1 Turn on this unit 2 "(Bluetooth device name)" or "Device Full" is displayed. Press the [SRC] button. Bluetooth device. By operating the Bluetooth device, register the hands-free unit or audio unit (pairing). Select "KENWOOD BT CD/R-6P1" from the list of found units. Input the PIN code ("0000") in the Bluetooth device. Check that registration is complete on the Bluetooth device. ✍✍PIN code is set to "0000" as the default. You can change this code. Refer to (page 58). hands-free connection. 2 Start registering this unit by operating the 3 Select a Bluetooth device name Turn the [VOL] knob. ✍✍To register a new Bluetooth device, select "Device Search", then go to . When registering a Bluetooth device for the first time (Registering a Bluetooth device) 4 Press the [VOL] knob. 5 Select the profile for the device to connect Turn the [VOL] knob. ✍✍ "HF" (HFP), "AUD" (A2DP), or "H&A" (HFP and A2DP) indicates the corresponding profile. 3 Enter a PIN code 2 "Searching" is displayed. Search for the Bluetooth device. When search is completed, "Finished" is displayed. 6 Set up the Bluetooth device name 3 Select a Bluetooth device name 4 "Confirm Device" is displayed. Turn the [VOL] knob and press it when the desired item is displayed. If "Pairing Success" is displayed, proceed to step 7. If "PIN code is displayed, proceed to steps 5. If "*** NG" is displayed, press the volume knob. Proceed to steps 4. Press the [VOL] knob. "✱H✱A (device name)": The selected Bluetooth device is busy. "-H-A (device name)": The selected Bluetooth device is on standby. " " (blank) (device name): The Bluetooth device is deselected. ✍✍If a Bluetooth device is already selected, deselect it, and then select a different one. 4 By operating the Bluetooth device, start ⁄ • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. 5 Input the PIN code 1. Turn the [VOL] knob and press it when the desired item is displayed. Select the digit. 2. Turn the [VOL] knob to select the numbers, and then press the [VOL] knob. Press the [VOL] knob for at least 1 second. If "Pairing Success" is displayed, registration is completed. When "Confirm Device" is displayed, confirm connection with a Bluetooth device operation. ✍✍ "H" (HFP) or "A" (A2DP) indicates the corresponding profile. 7 Exit easy pairing mode Press the [ ] button. Deleting the registered Bluetooth device 6 Transmit the PIN code 2 "(Bluetooth device name)" or "Device Full" is displayed. 3 Select a Bluetooth device name Turn the [VOL] knob. 4 Delete the selected Bluetooth device Press the [VOL] knob for at least 2 seconds. 27 | KDC-X996/ KDC-BT952HD English | 28