Kenwood KDC-X996 Instruction Manual - Page 22
Kenwood KDC-X996 Manual
View all Kenwood KDC-X996 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Clock and Other Functions Initial Settings You can select following Initial Setting items. "DSI" "F/W Update" DSI (Disabled System Indicator) of the unit blinks when the faceplate is removed. "OFF"/ "ON" Updates the firmware. The update information will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ ( : Factory setting) Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. 1 Select the Standby Pressing the [SRC] button repeatedly switches source. Select the "STANDBY" display. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select "Initial Settings". Turn the [VOL] knob. Display "Initial Settings" "SRC Select" Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 5 Make a setting 2 Drawing the faceplate to left side pull it to forward and remove it. 2 Enter Menu List mode Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. Press the [MENU] button for at least 1 second, and then press it again briefly. 6 Exit Menu List mode 3 Enter Initial Setting mode Demonstration mode Setting Turning the demonstration mode ON/OFF. 4 Select the setting item to adjust Overview 1 Enter Menu List mode ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select "DEMO Mode". Turn the [VOL] knob and press it when the desired item is displayed. Select "ON" or "OFF". Press the [MENU] button. Sets the source selection method. "Settings 1"/ "2" "Beep" Setting the operation check sound (beep sound) ON/OFF. "OFF"/ "ON" "Menu Language" You can select the display language for the Menu list item. "English"/ "Français"/ "Español" "Pandora Source" When this is set to ON, Pandora source can be selected. "ON": Allows you to select Pandora source by connecting an iPhone, iPod touch, Android or BlackBerry (with the Pandora® internet radio application). "OFF": Disable Pandora source selection. "Built in AUX" When this is set to ON, AUX source can be selected. "ON": Allows AUX source to be selected. Use this setting when the built-in AUX terminal is connected to the external equipment all the time. "OFF": Disable AUX source selection. Use this setting when the built-in AUX terminal is not used. "Forced CD-DA" Sets the method for reading CD. "Settings 1": Automatically distinguishes between audio file disc and music CD when playing disc. "Settings 2": Forces playing as music CD. "Built in AMP" Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "OFF"/ "ON" KDC-X996/ KDC-BT952HD 2 Enter Demonstration mode setting 3 Set the Demonstration mode Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. 4 Exit Menu List mode 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 43 | English | 44