Kenwood KDCX790 Instruction Manual - Page 45
Dual Zone System Setting, G-Analyzer Stop Watch
![]() |
View all Kenwood KDCX790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
G-Analyzer Stop Watch The control of stop watch can be started by GAnalyzer function. • Do not use G-Analyzer stop watch on the Public roads. 1 Select G-Analyzer Stop Watch mode Push the Control knob towards [FM] or [AM]. Select the "Stop Watch" display. 2 Enter G-Analyzer Stop Watch mode Press the Control knob for at least 1 second. "Stop" is displayed. 3 Enter Counter Ready mode Press the Control knob. "Ready" is displayed. 4 Start Count When G in the vertical direction is detected during the travel, the count automatically starts. "Running" is displayed. Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Display "Zone 2 : Rear" "Zone 2 : Front" Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel. • You can also start the counter by pressing the Control knob. 5 Stop Count Press the Control knob. "Stop" is displayed. • The control will start again when you accelerate or press the Control knob. Do the operation after step3. When you Reset the Count (While "Stop" is displayed) Press the Control knob for at least 2 seconds. • You can reset of count when the count is stopped. 6 Exit G-Analyzer Stop Watch mode Press the [MENU] button. • When "Running" is displayed (counted), the count is continued even though G-Analyzer Stop Watch mode is finished. If you want to stop the count, enter the menu mode then press the control knob. • When Power off (ex; ACC OFF) while counting, the value of 1 second or less will be "00". English | 45
![](/manual_guide/products/kenwood-kdcmp732-instruction-manual-07b924a/45.png)