Kenwood KMM-100U Instruction Manual - Page 4
Getting Started
View all Kenwood KMM-100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
GETTING STARTED 1 Cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: "CANCEL DEMO" \ "PRESS" \ "VOLUME KNOB" 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to select [CLOCK], then press the knob. 4 Turn the volume knob to select [CLOCK ADJ], then press the knob. 5 Turn the volume knob to adjust the hour, then press the knob. 6 Turn the volume knob to adjust the minute, then press the knob. Press 4 / ¢ to move between the hour and minute adjustment. 7 Press and hold to exit. (or) Press and hold SCRL DISP to enter clock adjustment mode directly while in clock display screen. Then, perform steps 5 and 6 above to set the clock. 3 Set the initial settings 1 Press SRC to enter [STANDBY]. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to select [INITIAL SET], then press the knob. 4 Turn the volume knob to make a selection (see the following table), then press the knob. 5 Press and hold to exit. • To return to the previous hierarchy, press . 4