Kenwood KMM-100U Instruction Manual - Page 5
Radio - firmware
View all Kenwood KMM-100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
GETTING STARTED PRESET TYPE Default: XX NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button regardless of the selected band. KEY BEEP PANDORA SRC BUILTIN AUX SWITCH PRE SP SELECT ON: Activates the keypress tone. ; OFF: Deactivates. KMM-100U : ON: Enables PANDORA in source selection. ; OFF: Disables. (➜ 9) ON: Enables AUX in source selection. ; OFF: Disables. (➜ 10) REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance. F/W UPDATE F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ RADIO Search for a station 1 Press L SRC to select TUNER. 2 Press repeatedly (or press *AM- / #FM+ on RC-406) to select FM1/ FM2/ FM3/ AM. 3 Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a station. • To store a station: Press and hold one of the number buttons (1 to 6). • To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406). Direct Access Tuning (using RC-406) 1 Press *AM- / #FM+ to select a band. 2 Press DIRECT to enter Direct Access Tuning. for FM) or "- - - -" (for AM) appears on the display. 3 Press the number buttons to enter a frequency. 4 Press ENT 38 to search for a frequency. • To cancel, press . • If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled. ENGLISH | 5