Kenwood KMM-BT304 Instruction Manual - Page 32
How to remove the unit, Installing the unit in-dash mounting, When installing without the mounting,
View all Kenwood KMM-BT304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Hook on the top side Orientate the trim plate as illustrated before fitting. Do the required wiring. ( 33) Dashboard of your car When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Bend the appropriate tabs to hold the mounting sleeve firmly in place. How to remove the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. Part list for installation (A) Faceplate (B) Trim plate (C) Mounting sleeve (D) Wiring harness (E) Extraction key Use only the specified screws. Using wrong screws might damage the unit. 32 ENGLISH (F) Screws