Kenwood KMM-BT304 Instruction Manual - Page 5
Change the crossover type, Caution - firmware update
View all Kenwood KMM-BT304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
GETTING STARTED DISPLAY EASY MENU (For ) When entering [FUNCTION]... ON: ZONE 1 illumination changes to white color. ; OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 25) • ZONE 2 illumination changes to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting. • Refer to the illustration on page 25 for zone identification. TUNER SETTING PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM/SW1/SW2). ; MIX: Memorizes one station for each preset button, regardless of the selected band. SYSTEM KEY BEEP (Not applicable if 3-way crossover is selected) ON: Activates the keypress tone. ; OFF: Deactivates. TDF ALARM (Not applicable if 3-way crossover is selected) ON: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 11) SPOTIFY SRC ON: Enables SPOTIFY in source selection. ; OFF: Disables. ( 12) BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 7) F/W UPDATE UPDATE SYSTEM F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, visit . FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels. CLOCK CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH TURKCE Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. Change the crossover type 1 Press repeatedly to enter STANDBY. 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select "2WAY" or "3WAY", then press the knob. 4 Turn the volume knob to select "YES" or "NO", then press the knob. The selected crossover type appears. • To cancel, press and hold . • To adjust the selected crossover settings, ( 22). Caution Select a crossover type according to how the speakers are connected. ( 33, 34) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. ENGLISH 5