Kenwood KMM-BT304 Instruction Manual 1 - Page 21

BLUETOOTH® (for / ) Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears. 2 Search and select this unit model name (KMM-BT3**/KMM-BT2**) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold the unit. to turn off BLUETOOTH - Audio While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. Audio player via Bluetooth 1 Press repeatedly to select BT AUDIO. 2 Operate the Bluetooth audio player to start playback. To Playback/pause Select group or folder Reverse/Forward skip Reverse/Fast-forward Repeat play Random play Select a file from a folder/list Switch between connected Bluetooth audio devices On the faceplate Press . Press / . Press S / T. Press and hold S / T. Press repeatedly. ALL REPEAT, FILE REPEAT, REPEAT OFF Press and hold to select ALL RANDOM. • Press to select RANDOM OFF. Refer to "Select a file from a folder/list" on page 9. Press 5.* * Pressing the "Play" key on the connected device itself also causes switching of sound output from the device. Operations and display indications may differ according to their availability on the connected device. ENGLISH 17