Kenwood KMM-BT304 Instruction Manual 1 - Page 24

20

ENGLISH

AUDIO SETTINGS

LOUDNESS

LEVEL1

/

LEVEL2

or

LV1

/

LV2

: Selects your preferred low and high frequencies boost to

produce a well-balanced sound at a low volume level. ;

OFF

: Cancels.

SUBWOOFER SET

ON

: Turns on the subwoofer output. ;

OFF

: Cancels.

FADER

(Not applicable if 3-way crossover is selected.)

R15

to

F15

(

0

): Adjusts the rear and front speaker output balance.

BALANCE

L15

to

R15

(

0

): Adjusts the left and right speaker output balance.

VOLUME OFFSET

–15

to

+6

(

0

): Preset the initial volume level of each source. (Before adjustment, select the

source you want to adjust.)

SOUND EFFECT

SOUND RECNSTR

(Sound

reconstruction)

(Not applicable for RADIO source and AUX source.)

ON

: Creates realistic sound by compensating the high-frequency components and restoring

the rise-time of the waveform that are lost in audio data compression. ;

OFF

: Cancels.

SPACE ENHANCE

(Not applicable for RADIO source.)

SMALL

/

MEDIUM

/

LARGE

or

SML

/

MED

/

LRG

: Virtually enhances the sound space. ;

OFF

: Cancels.

SND REALIZER

LEVEL1

/

LEVEL2

/

LEVEL3

or

LV1

/

LV2

/

LV3

: Virtually makes the sound more realistic. ;

OFF

: Cancels.

STAGE EQ

LOW

/

MIDDLE

/

HIGH

or

LOW

/

MID

/

HI

: Virtually adjust the sound position heard from the

speakers. ;

OFF

: Cancels.

DRIVE EQ

ON

: Boosts the frequency to reduce the noise heard from outside the car or running noise

of the tyres. ;

OFF

: Cancels.

SPEAKER SIZE

Depending on the crossover type you have selected

(

6)

, 2-way crossover or 3-way

crossover setting items will be shown.

(

21)

By default, 2-way crossover type is

selected.

X’OVER

DTA SETTINGS

For settings,

22, Digital Time Alignment settings

.

CAR SETTINGS

•

: For 2-way crossover:

[SUB-W LEVEL]

/

[SUBWOOFER SET]

is selectable only if

[SWITCH PREOUT]

is set to

[SUB-W]

.

(

5)

•

[SUB-W LEVEL]

is selectable only if

[SUBWOOFER SET]

is set to

[ON]

.

Crossover settings

Below are the available setting items for 2-way crossover

and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for

optimum performance.

•

The frequency and slope settings are automatically set

for the crossover of the selected speaker.

•

When 2-way crossover is selected, if

[NONE]

is selected

for

[TWEETER]

of

[FRONT]

,

[REAR]

and

[SUBWOOFER]

for

[SPEAKER SIZE]

, the

[X ‘ OVER]

setting of the speaker is not

available.

• When 3-way crossover is selected, if

[NONE]

is selected

for

[WOOFER]

of

[SPEAKER SIZE]

, the

[X’OVER]

setting of

[WOOFER]

is not available.

X ‘ OVER

• [FRQ]

/

[F - HPF FRQ]

/

[R - HPF FRQ]

/

[SW LPF FRQ]

/

[HPF FRQ]

/

[LPF FRQ]

: Adjusts the crossover frequency for the

selected speakers (high pass filter or low pass filter).

If

[THROUGH]

is selected, all signals are sent to the

selected speakers.

•

[F - HPF SLOPE]

/

[R - HPF SLOPE]

/

[SW LPF SLOPE]

/

[HPF SLOPE]

/

[LPF SLOPE]

/

[SLOPE]:

Adjusts the crossover slope.

Selectable only if a setting other than

[THROUGH]

is

selected for the crossover frequency.

• [SW LPF PHASE]

/

[PHASE]

:

Selects the phase of the speaker

output to be in line with the other speaker output.

• [GAIN LEFT]

/

[GAIN RIGHT]

/

[F - HPF GAIN]

/

[R - HPF GAIN]

/

[SW LPF GAIN]

/

[GAIN]

:

Adjusts the output volume of the

selected speaker.

Kenwood KMM-BT304 Instruction Manual 1 - Page 24

Crossover settings

Page 24 highlights